||Soft and thick plate for corrugated board and paper sack printing
The AFP-SR plate satisfies the severest criteria of quality in printing corrugated board,solid board and heavy-duty bags.
The surface unevenness of the printing material is compensated by the ideal shore hardness and the restoring behaviour of the AFP-SR plate.
2.84mm, 3.18mm, 3.94mm, 4.70mm, 5.00mm, 6.35mm
or 0.112", 0.125", 0.155", 0.185", 0.197", 0.250"
Inks and Solvents
Irrespective of the ink system used (solvent, water-based, or UV ink) the AFP-SR plate always ensures optimum ink transfer. It is permissable to use solvent mixtures containing a limited amount of active solvents (ethyl acetate content-preferably under 10%).
Storage of Raw Plates
AFP-SR plates should be stored at a room temperature of 5-25°C and relative humidity of 55%
Storage of Used Plates
Careful cleaning of the plates after printing is recommended. Direct exposure to sunlight, heat and high concentrations of ozone should be avoided.