PLATE MOUNTING TAPES FOR
CORRUGATED
|
|
Adheso-Graphics
die seal plate mounting tapes are engineered to provide maximum secure
adhesion between Photopolymer or Cloth backed rubber plates as they
are applied to the PVC or mylar carrier sheets typically used in the
printing of corrugated box or paper substrates. These pressure
sensitive adhesive films are caliper consistent, easy to reposition,
and environmentally friendly.
|
| FS-23 |
.0045" |
DOUBLE COATED
POLYESTER Film |
ACRYLIC
PSA |
|
Typical properties: Adhesion
PSTC #3 60 oz/inch width. Good plasticizer resistance.
Recommended for use with polyester
backed photopolymer plates. Liquid or sheet.
|
| FS-25 |
.003" |
DOUBLE COATED POLYESTER Film |
ACRYLIC
PSA |
|
Typical properties: Adhesion
PSTC #3 40 oz/inch width. High shear strength adhesive.
Recommended for use with polyester
backed photopolymer plates. Liquid or sheet.
|
| FS-50 |
.005" |
DOUBLE COATED POLYESTER Film |
SR
PSA |
|
Typical properties: Adhesion
PSTC #3 160 oz/inch width. Excellent shear & adhesion.
Recommended for use with cloth
backed rubber Engraving rubber & photopolymer plates
|
| FS-51 |
.005" |
DOUBLE COATED POLYESTER Film |
RUBBER
PSA |
| Typical
properties: Adhesion PSTC #3 85 oz/inch width.
Recommended for use with photopolymer plates in
permanent bond applications.
|
| FS-53 |
.0045" |
DOUBLE COATED POLYESTER Film |
RUBBER
PSA |
| Typical
properties: Adhesion PSTC #3 158 oz/inch width. Good shear, final
adhesive strength.
Recommended for use with rubber or photopolymer
plates. *Lay flat liner version of FS-50
|
| FS-49 |
.005" |
DOUBLE COATED POLYESTER Film |
SR
PSA |
|
Typical properties: Adhesion
PSTC #3 145 oz/inch width. Agressive immediate bond.
Recommended for use with Rubber or
Photopolymer plates.
|
| FS-67 |
2 Mil |
ADHESIVE TRANSFER Tape |
ACRYLIC
PSA |
|
Typical properties: Adhesion
PSTC #3 38 oz/inch width. High tack, temperature resistant
Excellent for bonding to a variety
of materials with rough or irregular surfaces
|
| FS-70 |
.002" |
ADHESIVE TRANSFER (UNSUPPORTED)
Tape |
ACRYLIC PSA |
| Typical
properties: Adhesion PSTC #1 93 oz/in. width. High adhesion &
final bond strength.
Recommended for use with squeeze roll
laminations on low surface energy plastics
|
| FS-90 |
.005" |
ADHESIVE TRANSFER Tape |
ACRYLIC
PSA |
|
Typical properties: Adhesion
PSTC #3 72 oz/in. High tack, temperature resistant.
Good bond & shear strength to
rough or irregular surfaces.
|
| 2R2 |
10 Mil |
DOUBLE COATED STICKYBACK |
SR
Elastomeric PSA |
|
Typical properties: Adhesion
internal method 50 oz/inch width. Solvent & Temp. resistant.
Flexographic mounting tape. Suited
for use with Rubber or Photopolymer plates. All types
|
| No
warranties are implied in this bulletin. Typical values only. Should
not be used in writing specifications. |
